Concrete Pool Decks in Jacksonville, FL by Jacksonville Professional Concrete
Jacksonville Professional Concrete builds and refinishes concrete pool decks in Jacksonville, FL with three priorities: sure footing for wet, bare feet, a surface that does not scorch on a sunny afternoon and drainage that keeps water away from the pool and the house. Pools here get used for most of the year, so the deck takes a lot of wear.
Pool decks in Northeast Florida face a tough mix. Strong sun, chlorine or saltwater systems, frequent downpours and, for homes near Atlantic Beach or along the Intracoastal, salt carried on the breeze all work on the surface. The right finish and a good sealer make a real difference in how the deck ages.
We also respect what is underneath. Sandy soil and a seasonal high water table mean the deck needs a well-compacted base and careful joints at the coping, so the slab and the pool shell can move independently. That attention below the surface is what keeps concrete pool decks in Jacksonville, FL flat and crack-free for years.
Why Choose Jacksonville Professional Concrete
- Licensed & Insured
- Years of experience pouring residential and commercial concrete
- Proper reinforcement on every pour
- Written warranty on workmanship
- Local crew, local reputation
- On-time, on-budget completion
- Free, no-obligation estimates
- Wide range of finishes
- Proper site prep and drainage grading
- Clean job sites
Our concrete pool deck services in Jacksonville
New pool deck installation
For a new pool or a full deck replacement, we compact the sand around the shell in lifts, form the deck with a consistent slope away from the water and reinforce it with wire mesh or rebar. Most decks are 4 inches thick. We leave a flexible expansion joint at the coping so the deck does not push against the pool beam, and we plan control joints that line up with the pool's shape.
Pool deck replacement
Old decks that are cracked, tilted toward the pool or sinking near the shell often have a washed-out base. We remove the slab carefully to protect the coping, tile and plumbing, then recompact and rebuild. Replacement lets you change the deck's footprint, add space for loungers or a shade structure and switch to a cooler, more slip-resistant finish.
Stamped and exposed aggregate decks
Stamped concrete can create a stone, slate or tile look around the pool, and we select patterns with enough texture to stay safe when wet. Exposed aggregate shows small stones in the surface and gives excellent traction, though very coarse stone can be hard on bare feet. Both finishes need a sealer with an anti-slip additive in pool areas.
Cool deck and textured finishes
A light-colored, textured topping such as a knockdown or spray-applied cool deck finish stays noticeably more comfortable underfoot than plain gray concrete. These finishes add grip without being rough, which matters when kids are running around the pool. They also hide small hairline cracks well and can be recoated when the surface starts to wear.
Resurfacing and overlays
If the slab underneath is solid but the surface is stained, faded or spalling, an overlay can refresh the deck without tearing it out. We clean and repair the concrete, fill cracks and apply a polymer-modified cement topping in a texture and color you choose. Resurfacing will not fix a deck that is still settling, so we check the base before recommending it.
Crack repair, joint sealing and sealing
Open joints let pool water and rain run into the sand below, which is how voids form under a deck. We clean out failed caulk at the coping and control joints and replace it with flexible sealant. Regular sealing protects the surface from chlorine, sun and salt, and slows the dark algae that grows in shaded corners.
How our pool deck process works
Site review and design
We look at the pool shape, coping, equipment location, gates, screen enclosure and how water currently drains. We talk about how you use the space, where furniture goes and which finish fits your comfort and maintenance goals. The written estimate spells out area, thickness, finish and sealer.
Base and drainage
We remove the old deck or excavate around a new shell, then compact the fine sand in thin lifts, especially where backfill around the pool was placed loosely. Forms are set with a fall of about a quarter inch per foot away from the water. Deck drains or a swale handle runoff on flatter lots.
Placement and finish
We pour in the cooler hours, place and screed the concrete and tool the joints. The surface gets a broom, stamped or aggregate finish, or is prepared for a cool deck topping applied after curing. Edges at the coping, steps and doorways are rounded and smooth to protect bare feet.
Curing, topping and sealing
The slab is kept moist so it cures evenly in the heat. Once ready, we apply the cool deck or decorative topping if specified, then the sealer with an anti-slip additive. We walk the deck with you and explain cleaning, joint care and resealing.
Frequently Asked Questions
How much does a concrete pool deck cost in Jacksonville?
A basic broom-finish deck generally falls in our $7 to $12 per square foot patio range. Exposed aggregate runs $10 to $15 per square foot, and stamped or decorative pool decks run $14 to $22. Removal of an old deck, work around tight coping, drains and any cool deck topping all affect the total, and we price every project in writing.
Which pool deck finish stays coolest in the summer?
Lighter colors stay cooler than dark ones, and textured cool deck finishes are designed to be comfortable under bare feet. Shade from an enclosure, a pergola or a large tree helps as well. Dark stamped colors look striking but can get uncomfortably hot by midafternoon, so we usually steer pool areas toward lighter tones.
How do you keep a pool deck from being slippery?
Texture and sealer choice do most of the work. Broom, knockdown, cool deck and exposed aggregate finishes all hold grip when wet. Smooth troweled concrete is a poor choice around water. On stamped or sealed decks, we mix an anti-slip grit into the sealer, and we recommend reapplying it when the surface starts to feel slick.
Does salt air or a saltwater pool damage concrete?
Salt can slowly break down unsealed concrete surfaces and cause scaling, especially on decks close to the ocean or with saltwater pool systems. A good mix, proper curing and a quality penetrating or film sealer protect against most of it. Rinsing the deck periodically with fresh water and resealing on schedule keeps the surface in good shape.
How does heavy rain affect a pool deck?
Jacksonville summers bring regular afternoon thunderstorms, and tropical systems during hurricane season can drop several inches at once. A deck that slopes toward the pool sends dirty runoff into the water, while one with poor joints lets water undermine the base. Correct slope, deck drains where needed and sealed joints handle these downpours.
Do I need a permit for a pool deck?
Requirements depend on the scope and the jurisdiction. New pool construction, deck additions and screen enclosures may each need a permit, while simple resurfacing often does not. We confirm what applies with the City of Jacksonville or your county or beach city, along with any HOA approval. For a pool deck estimate, call (904) 946-5411.